anyone got a puller?

**weena** · dubber Posts: 406 Join date: 2008-03-13

suitable for pulling springplates off the otter splines?

need to wind the back end of the bug up a notch Smile

_________________

shavenone · dubber Posts: 129 Join date: 2008-10-05

crow bar and a hammer

AxlFoley · dubber Posts: 113 Join date: 2009-01-22

did this on the bay, i leavered it out a bit, then had Ant smack the center back in, making sure i didnt leaver it all of the way out, nice and easy Smile

**weena** · dubber Posts: 406 Join date: 2008-03-13

will try and do it that way then

the camber at the moment is killing tyres and the drive to beligum is very long!

_________________

**Matty** · Subject: Re: anyone got a puller? Tue Jun 09, 2009 8:39 pm

Should be fine with a crow bar and hammer Smile

that's how i did Matt's '72... Take your wings off to do it tho ideally, as Matt's wings really got in the way of the swinging hammer!!

**weena** · dubber Posts: 406 Join date: 2008-03-13

easy to get my wings off Smile

_________________

**Matty** · Subject: Re: anyone got a puller? Tue Jun 09, 2009 11:43 pm

remember that also means removing the rear valance, the indicators/wiring and the tail/brake lights + wiring!