I have never been a big fan of drum brakes and poking my head through the clouds so i decided something had to be done!

Its not quite finished, but this is what i started out with


I then bought and rebuilt these (944 calipers)

to give me this, I also fitted a red 9 design kit that i bought of Matty.

that gave me this!

Unfortunaly to get the bus to roll at that height would require a bit of tubbing, so up it goes
while i was waiting on some braided lines, i decided to fit my rear disks and 4" droped swing arms


only problem is as nice as it looks I cant get my wheels on! so i either sell my 15s and get a set of 16" rims or well i dot know really lol

I still have the other side to do and sort out some problems with the rear disk kit, but I'm getting there........Slowly!!!

you cant get the 15s on

gonna have to be 17 inch fuchs then dude

and rub a dub tubbb!

yeah i cant get them between the arch and the caliper lol Im going to try something different today, if not i may have to get a set of 16" Teledials.

16s for the back dude - i saw a split on 15 and 16 inch fuchs looked awesome - and not too odd staggerd

Mark - will the disc and hub drop down enough for clearance if you remove the bottom shock bolt? A friend of mine has to do this on his splitty to get the rear wheels on/off

worth a try!

P.S. i'm so jealous! it's going to be amazing

nah check out the stop near the pivot, its at its lowest point, i may have to grind that away to allow it to drop down more!